Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Logo

 

iso ul New UL UniFlow Fume Hoods
Fume Hood Electrical Services

Electrical services are UL, CSA & CE listed. They come factory installed, wired to a single point junction box when ordered with fume hoods. Services must be wired to comply with local codes.

Electrical Services
Duplex receptacle Singe Receptacle
Duplex Receptacle
115V single phase receptacle. Installed on front column of fume hood. Includes junction box and cover plate. UL listed..
amps Cat. No.
15 amps 50029-1
20 amps 50029-2
Single Receptacle
230V single phase receptacle. Installed on front column of fume hood. Includes junction box and cover plate. UL listed.
amps Cat. No.
15 amps 50030-1
20 amps 50030-2
GFI Duplex
115V consists of combination ground fault interrupters, 3-wire polarized grounded. Includes junction box & cover plate. UL listed.
amps Cat. No.
15 amps 50048-1
20 amps 50048-2
Data Port
Cat 6, 10 gigabit ethernet, (2) port fixture. Installed on front column. Cabling not included.
Cat No. 50053
Light Switch Motor Starter Switch
Light Switch
(standard)
115V/15 amps. Includes junction
box and cover plate. UL listed.
Cat. No. 50028-1
Blower Switch with Pilot Light
Includes junction box and cover plate. UL listed.
volts/amps Cat. No.
115 V 15 amps 50027-1
230 V 20 amps 50027-3
Blower Switch
Mounted in a single gang receptacle box with face plate. Factory mounted not wired. Includes thermal overload protection. Double pole switch for up to 1 HP, single phase, 60 Hz 115V 50 Hz, 230V AC motors. UL listed.
Cat. No. 50050
Service Port
Pass-Through

Convenient port allows cords, tubes, or cables to pass to and from the hood.
Cat. No. 50100
Fume Hood Vapor Proof Light Fixtures
Vapor-Proof Light
Factory installed.
Accepts bulb up to 150w, 115V, UL listed,
(bulb not included)
Standard on CE, Canopy, Universal and EcoFlow hoods.
Cat. No. 50035

LED Light Fixture

Fluorescent Lighting

LED fixture with Stainless steel reflector, (2) tube, 115V, UL listed. (LEDs included) LED has a 50,000 hour average life span. Standard on SE and LE Fume hoods.
24 inch......................................... Cat. No. 51124
36 inch..........................................Cat. No. 51136
48 inch......................................... Cat. No. 51148

T-5 fixture with Stainless steel reflector, (2) tube, 115V/230V tubes changed from the outside.
(fluorescent tubes are included) UL listed.
24 inch..................................... Cat. No. 50224
36 inch......................................Cat. No. 50236
48 inch..................................... Cat. No. 50248
Explosion Proof Services
Explosion Proof Light Explosion-Proof Light Std
For use in hazardous locations. Gray, two-coat epoxy finish with easily removed prismatic globe. Factory mounted, not wired. Accepts compact fluorescent or LED, (bulb not included) 115V /230V UL listed. Class I Div II Group A, B,C,D Class II Div II Group F& G
Cat. No. 50034

Explosion-Proof Fixture
For use in hazardous locations.
Gray, two coat epoxy finish with easily removed prismatic globe. Accepts compact fluorescent or LED, (bulb not included)
115V/230V. Factory mounted, not wired. UL listed. Class I
Div I Group C, D, Class II Div I
Group E, F & G
Cat. No. 50038

Explosion-Proof Fluorescent Lighting
fixture is (2) tube, 115V/230V with tubes
changed from the outside. UL listed.
(fluorescent tubes are included)
24 inch........................ Cat. No. 50077
48 inch........................ Cat. No. 50078

Explosion-Proof Switch
For use in hazardous locations. Surface mount type with cast aluminum housing. Specify 115V/20 amp or 230V/20 amp.
UL listed.
Cat. No. 50036
Explosion-Proof Plug Adaptable for use with all receptacles. 3-pole, 2-wire, Specify 115V/20 amp or 230V/20 amp AC. Not installed at factory.
UL listed.
Cat. No. 50039
Explosion-Proof
Receptacle

For use in hazardous locations. Surface mount type with aluminum housing, 3-pole, 2-wire,
Specify 115V/20 amp or 230V/20 amp. Not installed at factory.
UL listed..
Cat. No. 50037
Explosion Proof GFI Explosion-Proof Ground
Fault Interrupter
For use in hazardous locations. Factory sealed GFI is designed to interrupt a circuit when a ground fault us detected. 115V 60 Hz, 20 amp. Not installed at factory. UL listed.
Cat. No. 50104
International Electrical Services (CE Configuration)
European Socket Continental European Socket with cover cap Type : CEE7
color: gray
Rating 250V/16 amp, with box and cover,
installed at factory
Cat. No. 50004
South Africa Socket Indian / South Africa
Socket ISA

Type : BS546
color: white
Rating 250V/15 amp, with box
and cover,
installed at factory.
Cat. No. 50006
UK Ireland Socket United Kingdom / Ireland
Shuttered Socket

Type : BS1363
color: white
Rating 250V/13 amp, with box and cover, installed at factory.
Cat. No. 50007
Panel Mount Socket Continental European Panel Mount Socket
Type : CEE7
color: white
Rating 250V/15 amp, with box and cover,
installed at factory.
Cat. No. 50008
 
     
  HEMCO Corporation 711 S. Powell Road Independence, MO 64056 816-796-2900 800-779-4362
    Copyright © 2010 HEMCO Corporation All Rights Reserved